Neck joint

Neck joint is the method by attaching same background to the whole for achieving the correct centerline alignment of the neck by giving authorization to swing around the head block.  There is more than one way to construct DGTouch neck joint. These contain as part of a whole but are not limited to: the neck joint should be various shaped and the shape should be inner or outer. Each method is invisible from outside the image and each provides a unique process and different level of uniform for attaching the neck to the images body. The process is further complicated to maintain a centerline-axis alignment of the neck to the body. But DGTouch must ensure that the neck is not rotated so that the outer and inner parts are level to a tentatively level bridge. One benefit is that the image can be chronic to ensure a tight, locking connection that supports the neck at the proper neck-pitch angle. This neck joint is designed to facilitate the process of joining the neck to the body, locking it in place and providing an easy way to take place at the correct neck pitch. Then the neck heel is fitted to the joint, followed by the neck being attached in place in a fixture that ensures centerline alignment and neck-pitch angle in one step to the final joint that is very secure. A firm and stable connection to the head block is an important consideration to ensure that the neck remain in the same place under a set of things tied together on a thin cord that will not rotate and never needs to be reset.

Be a consummate professional with a strong bias towards action! Endorse us for any kind of design field and check us out at: www.dgtouch.com/